QZC50-80/120-CWF Thermoformer
Cikakken Injin
I, Feature
01. Mechanical, pneumatic da lantarki hade.Duk ayyukan aiki ana sarrafa su ta hanyar PLC tare da allon taɓawa, mai sauƙi da dacewa a cikin aiki.
02. Servo motor ciyar, ciyar tsawon an steplessly gyara, wanda yake da sauri da kuma daidai.(Max.Seed:1000mm/s)
03. Heater tare da tsarin kula da zafin jiki na hankali zai iya ba da wutar lantarki ta atomatik don sarrafa dumama mutum, wanda ya dace da daidaituwar yanayin zafin jiki.Wannan tsarin yana da fa'idodi na sauƙin aiki, dacewa, dumama mai sauri (kawai 5 min daga 0-400digiri), barga (lashe) Za a iya aiwatar da wutar lantarki ta waje, canjin yanayin zafi bai wuce digiri 1 ba), adana makamashi (kimanin 15%) da tsawon rayuwar amfani da gobara.
04. ] Biyu hita (sama da ƙasa) tare da takardar pro-zafi kayan aiki.
05. Tare da gano faɗuwar takarda da kayan kariya.
06. Takardun kuɗi kafin lokaci.Na'urar tana da aikin ƙwaƙwalwar ajiya ta atomatik na lokacin dumama don sanya na'urar samun damar yanayin aiki na yau da kullun a farkon farkon.
07. Mold jinkiri.
08. The forming sama da ƙasa mold yi amfani da pneumatic biyu gwiwar hannu tsarin da jagora bushing yana amfani da inlay hali tare da m man shafawa (JFB) don sa sama da ƙasa mold aiki stably kuma daidai.The mold clamping ƙarfi ne babba kuma mai kyau ga inganta ingancin kayayyakin.
09. Heater ta atomatik aikin turawa ya sa ya yiwu a cirewa kuma a kan na'ura ba tare da yanke takardar ba a lokacin aikin samarwa, sa'an nan kuma ajiye takardar.
10.Samfuran sama da ƙasa suna amfani da tsarin daidaitawa ta hanyar lantarki, yana da saurin sauri da dacewa.
11. Tare da sauri canza mold kayan aiki, pneumatically clamping.
12. The up mold equips mataimakin mikewa iska Silinda da saukar mold equips mataimakin demoulding iska Silinda.
13. Samuwar yana da nau'ikan nau'ikan da za'a zaba --- vacuum forming, matsi forming, vacuum and pressure forming.
14. Mirgine takarda ta atomatik, sauƙaƙe ƙarfin aiki.
II, Sigar Fasaha
| Siga | QZC50-80/120-CWF (Yanayin No.) | |
| Akwai Sheet (mm) | 500-760 | |
| Kaurin takardar (mm) | 0.3-1.5 | |
| Max.dia.na takarda Roll (mm) | 600 | |
| Ƙarƙashin ƙira (mm) | 130 | |
| Ƙarƙashin ƙwayar ƙwayar cuta (mm) | 130 | |
| Mafi girman yanki (mm2) | 720×750 | |
| Matsakaicin tsawo (mm) | 70 | |
| Matsakaicin zurfin ƙira (mm) | 100 | |
| Iyawa (Cycle/min) | 6-16 | |
| Tushen Gas | Samar da iska (m3/min) | ≥3 |
| Matsi (MPa) | 0.8 | |
| Amfanin ruwa | 4-5 Cube/Hour | |
| Vacuum famfo | Farashin R50100 | |
| Ƙarfi | 380V/220V 50Hz | |
| Wutar lantarki (Kw) | 86.4 | |
| Motoci (Kw) | 8 | |
| Babban iko (Kw) | 96 | |
| Girma (L×W×H)(mm) | Kimanin 7500×1800×2300 | |
| Nauyi (Kgs) | Kusan 7800 | |
III, Kayan Fasaha
| PLC | Taiwan Delta |
| Mai duba allon taɓawa (10.4 inch / Launi) | Taiwan Delta |
| Motar ciyarwa (4.5kw) | Taiwan Delta |
| Mai zafi | Jamus |
| M ƙarfin lantarki mai daidaitawa | China |
| Mai tuntuɓar juna | Jamus Siemens |
| Thermo gudun ba da sanda | Jamus Siemens |
| Relay | Jamus Weidmuller |
| Vacuum famfo | Farashin R50100 |
| Cutar huhu | Japan SMC |
| Silinda | China |
Misali Hotuna
Hotunan kwantena
