MFC7660 3 Tashoshi Thermoformer
Cikakken Injin
Amfani
An ƙera na'urar ne don samar da kwantena na filastik masu buɗewa iri-iri, kamar tiren abinci, tiren filastik, tiren kayan kwalliya, blister, clamshells, faranti da sauran abubuwan da ke da alaƙa da filastik.
Dace Sheet
PVC, PP, PS, OPS, PET, APET, PETG, CPET da dai sauransu
Siffofin Tsari
1.Mechanical, pneumatic da haɗin lantarki, duk ayyukan aiki ana sarrafa su ta hanyar PLC.Allon taɓawa yana sa aikin ya dace da sauƙi.
2.Matsi Da/Ko Vacuum forming.
3.Up da ƙasa mold kafa hanya.
4.Servo motor ciyar, ciyar da tsawon za a iya mataki-kasa gyara.Babban gudun kuma daidai.
5.Upper & ƙananan hita, dumama sassa uku
6.Heater tare da tsarin kula da zafin jiki na hankali, samar da atomatik mai kula da dumama mutum.Saurin dumama (minti 3 daga digiri 0-400), ba za a yi shi ta hanyar wutar lantarki ta waje ba.
7.Forming da yankan naúrar mold bude da kuma kusa sarrafawa ta servo motor, samfurori ta atomatik ƙidaya.
8.Aikin haddar bayanai na iya adana saiti 120 na bayanai masu gudana.
9. Products za a iya zaba stacked downward.
10.Feeding nisa za a iya synchronously ko da kansa gyara a cikin lantarki hanya.
11.Heater za ta atomatik tura-fita lokacin da takardar ne a kan mai tsanani.
12.Auto rolling sheet loading, rage aiki load.
Sigar Fasaha
| Fadin takarda (mm) | 500-800 | |
| Kaurin takarda (mm) | 0.2-1.5 | |
| Matsakaicin diamita na takarda (mm) | 800 | |
| Samar da bugun jini (mm) | (Na sama) 140, (kasa) 140 | |
| Mold clamping force (ton) | 45 | |
| Mafi girman yanki (mm2) | 760×600 | |
| Wurin kafa Min (mm2) | 500×460 | |
| Faɗin ƙira (mm) | 500-760 | |
| Tsawon ƙira (mm) | 460-600 | |
| Matsakaicin girman zurfin/tsawo (mm) | 120/70 | |
| Yanke bugun jini (mm) | (sama) 80, (kasa) 140 | |
| Mafi girman yanki (mm2) | 760×600 | |
| Yanke karfi (ton) | 60 | |
| Zagaye (lokaci/min) | Max30 | |
| Sanyi | Ruwa sanyaya | |
| Samar da iska | girma (m3/min) | ≥2 |
| Matsin iska (MPa) | 0.8 | |
| Vacuum famfo | Farashin R50100 | |
| Tushen wutan lantarki | 3 lokaci 4 layi 380V50Hz | |
| Wutar lantarki (kw) | 120 | |
| Matsakaicin ƙarfin gabaɗaya (kw) | 150 | |
| Girma (L×W×H) (mm) | 12540×3200×3200 | |
| Nauyi (T) | ≈14 | |
Tsarin Fasaha
| PLC | Taiwan Delta |
| Duban allo (10.4 inch / Launi) | Taiwan Delta |
| Motar servo (5.5kw) | Taiwan Delta |
| Ƙirƙirar sama / ƙasa mold servo motor (4.5kw) | Taiwan Delta |
| Yanke sama / ƙasa mold servo motor (4.5kw+5.5kw/4.5kw) | Taiwan Delta |
| Mai zafi (196 inji mai kwakwalwa) | Jamus Elstein |
| Mai tuntuɓar juna | Jamus Siemens |
| Thermo Relay | Jamus Siemens |
| Relay | Jamus Weidmuller |
| SSR | Carlo Gavazzi |
| Vacuum Pump | Jamus Busch |
| Tsarin Lubrication Na atomatik | Taiwan ChenYing |
| Firikwensin matsa lamba na lantarki | Taiwan Delta |
| Cutar huhu | JAPAN SMC |
| Silinda | JAPAN SMC & Taiwan Airtac |
Game da Mengxing
Babban samfuranmu jerin: XC jerin cikakken atomatik high-gudun injin kafa inji, XCH jerin lokacin farin ciki takardar injin kafa inji, MFC jerin Multi tashoshi matsa lamba & Vacuum kafa inji da HTJ sabon inji jerin.Dace da daban-daban takardar forming, Irin su PET, PVC, PS, PP, biodegradable, PLA, BOPS.
Misali Hotuna
Hotunan kwantena
