MFC7254 3 Tashoshi Thermoformer
Cikakken Injin
Amfani
An ƙera na'urar ne don samar da kwantena na filastik masu buɗewa iri-iri, kamar tiren abinci, tiren filastik, tiren kayan kwalliya, blister, clamshells, faranti da sauran abubuwan da ke da alaƙa da filastik.
Dace Sheet
PVC, PP, PS, OPS, PET, APET, PETG, CPET da dai sauransu.
Siffofin Tsari
Haɗin injina, huhu da lantarki, duk ayyukan aiki PLC ne ke sarrafa su.Allon taɓawa yana sa aikin ya dace da sauƙi.
Matsi Da/Ko Vacuum forming.
Hanyar samar da mold sama da ƙasa.
Ciyarwar motar Servo, tsayin ciyarwa za a iya daidaita matakin-ƙasa.Babban gudun kuma daidai.
Upper & ƙananan hita, dumama sassa uku
Heater tare da tsarin sarrafa zafin jiki na hankali, samar da atomatik dumama sarrafa dumama mutum.Saurin dumama (minti 3 daga digiri 0-400), ba za a yi shi ta hanyar wutar lantarki ta waje ba.
Ƙirƙira da yankan naúrar buɗewa da kusa da injin servo, samfuran ƙidaya ta atomatik.
Ayyukan haddar bayanai na iya adana saiti 60 na bayanan da ke gudana.
Kayayyakin ƙasa Stacking.
Faɗin ciyarwa na iya aiki tare ko daidaita shi ta hanyar lantarki.
Heater zai fitar ta atomatik lokacin da takardar ta cika zafi.
Load ɗin takarda ta atomatik, rage nauyin aiki.
Sigar Fasaha
| Fadin takarda (mm) | 500-760 | |
| Kaurin takarda (mm) | 0.1-1.5 | |
| Matsakaicin diamita na takarda (mm) | 800 | |
| Samar da bugun jini (mm) | (Na sama) 145, (kasa) 145 | |
| Mold clamping force (ton) | 45 | |
| Mafi girman yanki (mm2) | 720×540 | |
| Wurin kafa Min (mm2) | 460×350 | |
| Faɗin ƙira (mm) | 460-720 | |
| Tsawon ƙira (mm) | 350-540 | |
| Matsakaicin girman zurfin/tsawo (mm) | 120/100 | |
| Yanke bugun jini (mm) | (sama) 145, (kasa) 145 | |
| Mafi girman yanki (mm2) | 720×540 | |
| Yanke karfi (ton) | 60 | |
| Zagaye (lokaci/min) | Max40 | |
| Sanyi | Ruwa sanyaya | |
| Samar da iska | girma (m3/min) | ≥2 |
| Matsin iska (MPa) | 0.8 | |
| Vacuum famfo | R50100 | |
| Tushen wutan lantarki | 3 lokaci 4 layi 380V50Hz | |
| Wutar lantarki (kw) | 80 | |
| Matsakaicin ƙarfin gabaɗaya (kw) | 100 | |
| Girma (L×W×H) (mm) | 10600×3200×2600 | |
| Nauyi (T) | ≈13 | |
Abubuwan Fasaha
| PLC | Taiwan Delta |
| Duban allo (10.4 inch / Launi) | Taiwan Delta |
| Motar servo (5.5kw) | Taiwan Delta |
| Ƙirƙirar sama / ƙasa mold servo motor (4.5kw + 4.5kw) | Taiwan Delta |
| Yanke sama / ƙasa mold servo motor (5.5kw + 5.5kw) | Taiwan Delta |
| Mai zafi (156 inji mai kwakwalwa) | China Tianbao |
| Mai tuntuɓar juna | Switzerland ABB |
| Thermo Relay | Switzerland ABB |
| Relay | Jamus Weidmuller |
| SSR | China Yau |
| Vacuum Pump | China Rufus |
| Tsarin Lubrication Na atomatik | Taiwan ChenYing |
| Firikwensin matsa lamba na lantarki | Taiwan Delta |
| Cutar huhu | JAPAN SMC |
| Silinda | JAPAN SMC & Taiwan Airtac |
Me yasa zabar mu
A duniya, an sayar da injinan mu.Kyakkyawan aikin injin yana taimakawa samun amincewa da shawarwarin abokan ciniki.Muna ci gaba da yin saka hannun jari a samarwa ta atomatik da bincike da haɓaka yanayin zafi.Mu ne masu kirkiro da shugabannin masana'antu a kasar Sin.yana aiki koyaushe don zama babban masana'anta.Domin bincika kasuwa tare da samar wa abokan cinikinmu kyakkyawan sabis, muna kuma ƙarfafa abokan hulɗa daga wasu ƙasashe su shiga cikin mu kuma su zama wakilai.
Tun daga 1998:Factory kafa a 1998.Location: High-tech sha'anin a lardin Guangdong
Zane da Kera:Fara ƙira da kera matsa lamba ta atomatik da injin ƙira daga 2007.
Kwarewa fiye da shekaru 20:Fiye da shekaru 20 gwaninta a kan injin ƙira da matsa lamba ta atomatik da injin ƙira.
4.5000m² taron:An ƙaddamar da bincike da haɓaka kayan aikin fakitin thermoforming filastik
Misali Hotuna
Hotunan kwantena
